Ein Kehlbalken Dach mit gewählter Geometrie wird in Hinblick auf seine Schnittgrößen zwischen Berechnung mittels RFEM 6 und der Handrechnung verglichen. Dabei werden insgesamt 3 Lastsysteme untersucht.
Este ejemplo compara las longitudes eficaces y el factor de carga crítica, que se pueden calcular en RFEM 6 utilizando el complemento Estabilidad de la estructura, con un cálculo manual. El sistema estructural es un pórtico rígido con dos pilares articulados adicionales. Este pilar está cargado por cargas puntuales verticales.
Una placa ortótropa cuadrada en capas está completamente fijada en su punto medio y sometida a presión. Compare las flechas de las esquinas de la placa para comprobar la corrección de la transformación.
Determinar la deformación máxima de un muro dividido en dos partes iguales. Las partes superior e inferior están hechas de un material elastoplástico y elástico, respectivamente, y ambos planos extremos están restringidos para moverse en la dirección vertical. Se omite el peso propio del muro; sus bordes están cargados con una presión horizontal ph y el plano medio con una presión vertical.
Un voladizo está completamente fijado en el extremo izquierdo y cargado por un momento flector en el extremo derecho. El material tiene diferentes resistencias plásticas a tracción y compresión.
Una placa delgada está completamente fija en el extremo izquierdo y cargada con una presión uniforme. El material plástico se considera para el cálculo.
Un cilindro hecho de suelo elastoplástico se somete a condiciones de prueba triaxiales. Ignorando el peso propio, el objetivo es determinar la tensión vertical límite para el fallo por tensión tangencial. Se considera una tensión hidrostática inicial de 100 kPa.
Un voladizo ahusado se fija completamente en el extremo izquierdo y se somete a una carga continua q. Se consideran las pequeñas deformaciones y se desprecia el peso propio en este ejemplo. Determine la flecha máxima.
Una placa delgada se fija completamente en el extremo izquierdo y se somete a una presión uniforme. La placa se lleva al estado elástico-plástico mediante la presión uniforme.
Una membrana se estira por medio de un pretensado isótropo entre dos radios de dos cilindros concéntricos que no se encuentran en un plano paralelo al eje vertical. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Este ejemplo de verificación se basa en el ejemplo de verificación 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Una membrana cilíndrica se estira por medio de un pretensado isótropo. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Un cable está cargado por medio de una carga uniforme. This causes the deformed shape in the form of the circular segment. Determine the equilibrium force of the cable to obtain the given sag of the cable. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Una membrana de globo esférico se llena con gas con presión atmosférica y volumen definido (estos valores se usan solo para la definición del modelo de elementos finitos). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
A thin rectangular orthotropic plate is simply supported and loaded by uniformly distributed pressure. The directions of axes x and y coincide with the principal directions. Determine la deformación máxima de la placa sin considerar el peso propio.
Un sistema monomasa con amortiguador está sometido a una fuerza de carga constante. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Una viga articulada con una sección rectangular está sometida a una carga distribuida y desplazada verticalmente por la excentricidad. Considering the small deformation theory, neglecting the self‑weight, and assuming that the beam is made of isotropic elastic material, determine the maximum deflection.
Una estructura de pórtico de un solo vano de dos plantas está sometida a una carga sísmica. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Un recipiente de paredes gruesas está cargado por una presión interna tal que el recipiente alcanza un estado elástico-plástico. While neglecting self‑weight, the analytical and numerical solutions for the radial position of the plastic zone border (under the Tresca hypothesis) are determined and compared.
Un muro de fábrica está expuesto a una carga distribuida en el medio de su sección superior. The Isotropic Masonry 2D material model is compared with the Isotropic Linear Elastic model, with surface stiffness property Without Tension in the nonlinear calculation.
Una viga de madera reforzada con dos placas de acero en los extremos está cargada por presión. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Cuatro pilares están fijos en la parte inferior y conectados por un bloque rígido en la parte superior. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Un voladizo de sección variable está completamente fijado en el extremo izquierdo y cargado por una carga continua. Plastic material is considered for the calculation.
Una placa ortótropa cuadrada en capas está completamente fijada en su punto medio y sometida a presión. Compare the deflections of the plate corners to check the correctness of the transformation.
Un voladizo con fibras que no discurren en dirección del eje de la viga desde una sección cuadrada con presión de tracción. Calculate the maximum deflection.
Un bloque tridimensional hecho de material elástico-plástico está fijado en ambos extremos. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determinar la flecha máxima de un bloque tridimensional fijo en ambos extremos. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.